A quick note before getting into the updates. There is a mobile version of this blog for those on phones or tablets. Loads quicker and all that. Anyways, up until now I actually hadn't properly set it up and it was showing some default values that come with the software. I've finally got around to fixing that, so the mobile version should be up to snuff now.

On with a couple of pics that Terry sent over. He's made good progress on the aft end of the boat with pretty much the whole engine bed area done now:

With that, there is also the cockpit that needed to be nicely cleaned up after all the holes got filled in:

Terry likes to make his boats bullet proof, check out the Periwinkle I (the catboat) for proof of that with one and a half inches of marine plywood all around plus fiberglass..

Either way, this is great progress and it's just a matter of time before he gets the tank in, engine mounts and then the engine. Need a bit of plumbing in there too for intake and out for cooling and the scuppers need somewhere to drain out to too. Getting there.

This entry was posted on August 12, 2011 at 12:03 AM and has received 162 views. There are currently 0 comments. Print this entry.